国产精品亚洲一区二区三区,和老婆长途汽车的轮杆,欧美黑人XXXX高潮猛交

LOADING IMAGES

氟化鉀

CAS號	7789-75-5
規格	25KG/袋1	純度	≥99
貨號	1	貨期	1天
品牌	Yingke	庫存	100ton
規格	25KG/袋1
純度	≥99
貨號	1
貨期	1天
品牌	Yingke
庫存	100ton
注意：請務必與賣家聯系核實單價庫存，以確保您的資金安全及交易順利。
參考價：需詢盤

立即詢盤

貨號	品牌	純度	規格	參考價	貨期
1	Yingke	≥99	25KG/袋1	需詢盤	1天

產品詳情

詳細信息(中文)：
氟化鉀,無水 - 性質開放數據可信數據無色立方晶體。易潮解。相對密度2. 48。熔點858℃。沸點1505℃。折射率1. 363。易溶于水，能溶于氫氟酸和液氨，微溶于醇及丙酮。水溶液呈堿性，能腐蝕玻璃及瓷器。加熱至升華溫度時才少許分解，但熔融氰化鉀的活性較大，能腐蝕耐火物質。與過氧化氫可形成加成物KF．H2 02。水合物有兩種：KF．2H20和KF．4H20。低于40.2℃時，水溶液中可結晶得到二水物(KF．2H20)，系單斜晶體，41℃時可自溶于結晶水中。有毒。最后更新：2022-01-01 11:01:14 氟化鉀,無水 - 制法開放數據可信數據中和法：在中和池內用等量水溶解固體氫氧化鉀，然后通入無水氫氟酸（或40%氫氟酸）進行反應，至pH=7～8時，停止通入無水氫氟酸，靜止沉降24h,所得澄清液（含氟化鉀40%左右）送至真空蒸發器進行真空濃縮(壓力為79993Pa)、待溶液中含有大部分結晶時，再經過濾(壓力為0. 2～0. 3MPa)、真空干燥(壓力為79993Pa) 6h,制得氟化鉀成品。最后更新：2022-01-01 11:01:15 氟化鉀,無水 - 用途開放數據可信數據用于玻璃雕刻、食物防腐、電鍍。可用作焊接助熔劑、殺蟲劑、有機化合物的氟化劑、催化劑、吸收劑（吸收HF和水分）等。也是制取氟化氫鉀的原料。最后更新：2022-01-01 11:01:14 氟化鉀,無水 - 安全性開放數據可信數據本品有毒，LD50 245mg/kg。對黏膜、上呼吸道、眼睛、皮膚組織有極強的破壞作用。吸入后可因喉及支氣管的炎癥、水腫、痙攣及化學性肺炎、肺水腫而致死。中毒表現有燒灼感、咳嗽、喘息、喉炎、氣短、頭痛、惡心和嘔吐。具體防護措施呼吸系統防護：空氣中濃度超標時，應該佩帶防毒口罩。緊急事態搶救或逃生時，建議佩戴自給式呼吸器。眼睛防護：戴化學安全防護眼鏡。身體防護：穿相應的防護服。手防護：戴防化學品手套。其他：工作現場禁止吸煙、進食和飲水。工作畢，淋浴更衣。工作服不準帶至非作業場所。單獨存放被毒物污染的衣服，洗后備用。保持良好的衛生習慣。該物質對環境有危害，應特別注意對水體的污染。對含氟廢水的處理主要有以下3種方法：①鈣鹽沉淀法。②鈣鹽一硫酸鋁共沉淀法。③鈣鹽一磷酸鹽法。包裝及貯運時用內襯兩層聚乙烯塑料袋的聚丙烯編織袋或用聚乙烯塑料桶包裝，每袋凈重lOkg或25kg．每桶凈重50kg。包裝上應有明顯的“有毒品’’標志。應貯存在陰涼、通風的干燥庫房中，防止潮濕結塊。勿與食用化工產品、酸、堿類物品共貯混運。運輸過程中要防雨淋和烈日曝曬。屬無機有毒品，危規編號：GB 6.1類61513.UN N0.1812; IM-DG CODE 6242頁．6.1類。滅火方法：干粉、砂土。

詳細信息(英文)：
Name Potassium fluoride Synonyms SUCROSE, MOLECUL POTASSIUM FLUORIDE Potassium fluoride Potassium fluoride solution Anhydrous Potassium Fluoride Potassium fluoride anhydrous Potassium fluoride on alumina potassium fluoride spray dried POTASSIUM FLUORIDE ON CELITE(R) POTASSIUM FLUORIDE ANHYDROUS pure Potassium Fluoride, Anhydrous, Reagent POTASSIUM FLUORIDE IN D2O NMR REFERENCE STANDARD CAS 7789-23-3 12178-06-2 EINECS 232-151-5 InChI InChI=1/FH.K/h1H;/q;+1/p-1 InChIKey NROKBHXJSPEDAR-UHFFFAOYSA-M Potassium fluoride - Physico-chemical Properties Molecular Formula FK Molar Mass 58.1 Density 2.48 Melting Point 858 °C (lit.) Boling Point 1505 °C Flash Point 1505°C Water Solubility 92.3 g/100 mL (18 oC) Solubility H2O: 1M at20°C, clear, colorless Vapor Presure 1.3 hPa (885 °C) Vapor Density 2 (vs air) Appearance spray-dried Specific Gravity 2.481 Color White Odor Odorless Exposure Limit ACGIH: TWA 2.5 mg/m3NIOSH: IDLH 250 mg/m3; TWA 2.5 mg/m3 Maximum wavelength(λmax) ['λ: 260 nm Amax: 0.01', , 'λ: 280 nm Amax: 0.01'] Merck 14,7632 BRN 3902818 PH 7.0-8.5 (25℃, 1M in H2O) Storage Condition Store at +5°C to +30°C. Stability Stable. Protect from moisture. Incompatible with strong acids, strong bases. Sensitive Hygroscopic Refractive Index 1.363 Physical and Chemical Properties Character: colorless cubic crystal. Deliquescence. melting point 858 ℃ boiling point 1505 ℃ relative density 2.48 refractive index 1.363 soluble in water, soluble in hydrofluoric acid and liquid ammonia, slightly soluble in alcohol and acetone. The aqueous solution is alkaline. Use Used for glass engraving, food anti-corrosion, electroplating, etc., also used as welding flux, insecticide, fluoride agent, absorbent Potassium fluoride - Risk and Safety Hazard Symbols T - Toxic Toxic Risk Codes R25 - Toxic if swallowed R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed. Safety Description S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37 - Wear suitable protective clothing and gloves. UN IDs UN 1812 6.1/PG 3 WGK Germany 3 RTECS TT0700000 FLUKA BRAND F CODES 3 TSCA Yes HS Code 2826 19 90 Hazard Note Harmful Hazard Class 6.1 Packing Group III Toxicity MLD in guinea pigs (mg/kg): 250 orally, 350 s.c.; in frogs (mg/kg): 375 s.c. (Simonin) Potassium fluoride - Upstream Downstream Industry Raw Materials Hydrofluoric Acid Hydrofluoric Acid Potassium hydroxide Potassium carbonate Hydrofluoric Acid Downstream Products Potassium hydroxide Methyl fluoroacetate 2,3,4-Trifluoronitrobenzene 2-Fluorophenol 3-Chloro-4-fluoroaniline 4-Fluoroaniline 2,6-Difluorobenzonitrile 1-Bromo-2-fluoroethane 2,4-Difluoroaniline 2,6-Difluorobenzamide Hexaflumuron Potassium fluoride - Nature Open Data Verified Data colorless cubic crystals. Deliquescence. The relative density was 2. 48. Melting point 858 °c. Boiling point 1505 °c. Refractive index 363. Soluble in water, soluble in hydrofluoric acid and liquid ammonia, slightly soluble in alcohol and acetone. The aqueous solution is alkaline and can corrode glass and porcelain. When heated to sublimation temperature, a little decomposition, but the activity of molten potassium cyanide is larger, can corrode refractory substances. The adduct KF.H2 02 can be formed with hydrogen peroxide. There are two types of hydrate: KF.2H20 and KF.4H20. When it is lower than 40.2 ℃, dihydrate (KF.2H20) can be obtained by crystallization in aqueous solution, which is Monoclinic crystals, 41 degrees can be dissolved in the crystallization of water. Toxic. Last Update：2022-01-01 11:01:14 Potassium fluoride - Preparation Method Open Data Verified Data neutralization method: solid potassium hydroxide is dissolved in equal amount of water in the neutralization tank, and then anhydrous hydrofluoric acid (or 40% hydrofluoric acid) is introduced to react until pH = 7~8, stop feeding anhydrous hydrofluoric acid, static sedimentation for 24h, and the obtained clear liquid (containing about 40% of potassium fluoride) is sent to vacuum evaporator for vacuum concentration (pressure is 79993). When most crystals are contained in the solution, then filtered (pressure is 0. 2~0. 3MPa), vacuum drying (pressure 79993) 6h, prepared potassium fluoride products. Last Update：2022-01-01 11:01:15 Potassium fluoride - Use Open Data Verified Data for glass engraving, food preservation, electroplating. It can be used as a welding flux, an insecticide, a fluorinating agent of an organic compound, a catalyst, an absorbent (absorbing HF and moisture), and the like. It is also a raw material for the preparation of potassium hydrogen fluoride. Last Update：2022-01-01 11:01:14 Potassium fluoride - Safety Open Data Verified Data This product is toxic, LD50 245mg/kg. On the mucosa, upper respiratory tract, eyes, skin tissue has a strong destructive effect. After inhalation may be due to inflammation of the larynx and bronchi, edema, spasm and chemical Pneumonia, pulmonary edema and death. Poisoning manifestations were burning, Cough, wheezing, laryngitis, shortness of breath, Head Pain, Nausea and Vomit. Specific Protection Measure respiratory system protection: when the concentration in the air exceeds the standard, should wear a respirator. In case of emergency rescue or escape, it is recommended to wear self-contained breathing apparatus. Eye protection: wear chemical safety glasses. Physical Protection: Wear appropriate protective clothing. Hand Protection: wear chemical protective gloves. Other: no smoking, eating and drinking at work. After work, take a shower and change clothes. Work clothes should not be taken to non-work sites. Clothing contaminated with toxicants should be stored separately and used after washing. Maintain good hygiene practices. This substance is harmful to the environment, and special attention should be paid to the pollution of water bodies. There are three main methods for the treatment of fluoride-containing wastewater: ①calcium salt precipitation method. Calcium salt aluminum sulfate co precipitation method. The calcium salt phosphate method. For packaging and storage, polypropylene woven bags lined with two-layer polyethylene plastic bags or polyethylene plastic barrels shall be used, with a net weight of 10kg or 25kg per bag, and a net weight of 50kg per barrel. The package should be marked with a "drug" sign. Should be stored in a cool, ventilated, dry warehouse, to prevent moisture caking. Do not store and transport together with edible chemical products, acids and alkalis. Protection against rain and sun exposure during transport. It is an inorganic drug, with risk CODE: GB 6.1 61513.UN N0.1812; IM-DG CODE, P. 6242, category 6.1. Fire extinguishing method: dry powder, sand. Last Update：2022-01-01 11:01:16 Potassium fluoride - Reference Information LogP -0.77 at 25℃ NIST chemical information information provided by: webbook.nist.gov (external link) EPA chemical substance information information provided by: ofmpeb.epa.gov (external link) Introduction potassium fluoride is a salt, also known as potassium fluoride, which is a white monoclinic crystal or crystalline powder, salty, easy to absorb moisture, soluble in water and insoluble in ethanol. Its aqueous solution is alkaline and can corrode glass and porcelain, so it is usually used as a variety of glass etching, welding flux, wood preservative, agricultural pesticides, pesticide intermediates, pharmaceutical industry raw materials and organic fluorinated raw materials, in the construction, chemical industry, agriculture has an indispensable role. application field potassium fluoride is still one of the most commonly used fluorinating agents, and it can be said that there is no vigorous development of fluorine chemical industry without potassium fluoride. And potassium fluoride as the most important period of the reaction activity of the fluoride agent, as a fluoride agent, especially in the production and application of fine chemicals, high activity potassium fluoride has the incomparable advantages of ordinary anhydrous potassium fluoride. sodium fluoride and potassium fluoride Both sodium fluoride and potassium fluoride are white crystals having a rock salt type structure. Sodium fluoride is relatively insoluble in water (100 ° C., 5g/92.3 ml of water), while potassium fluoride has strong hygroscopicity and is very soluble in water (g/g of water at 18 ° C.). Potassium fluoride has dihydrate (mp41 °c) and tetrahydrate (mp19.3 °c). sodium fluoride and potassium fluoride, unlike other alkali metal halide salts (e. G., sodium chloride), are alkaline and easily undergo an addition reaction with hydrogen fluoride to form acid salts. sodium fluoride and potassium fluoride can be separately with sodium carbonate or potassium carbonate, according to the calculated amount of hydrofluoric acid neutralization can be made, if the hydrofluoric acid excess, acid salts (sodium fluoride acid NaHF2 or potassium fluoride acid KHF2) are brought in. K2CO3 2HF → 2KF H2O CO2 KF HF → KHF2. sodium fluoride is prepared industrially by reacting sodium fluorosilicate with an aqueous solution of sodium hydroxide. Na2SiF6 6NaOH → 6NaF Na2SiO3 3H2O sodium fluoride is the most inexpensive fluorinated alkali metal, and hydrogen fluoride can be used to form acid salts, it is used as an adsorbent for hydrogen fluoride in the atomic energy industry and other fields. potassium fluoride and sodium fluoride are more easily dissociated in various solvents. Since fluoride ions (F-) are easily formed, they can be used as fluorinating agents for organic compounds, in particular as fluorinating agents for halide exchange processes. RCl kf→rf KCl recently, potassium fluoride has been gradually used as a condensing agent in organic reactions by taking advantage of the strong binding strength of fluoride ions and hydrogen ions. potassium hydrogen fluoride potassium hydrogen fluoride, also referred to as "potassium fluorohydride", "potassium acid fluoride", and "potassium fluoride", is an acid salt of hydrofluoric acid. Chemical formula khf2. Molecular weight 78.11. Colorless equiaxed crystal system, easy deliquescence. Toxic! The relative density is 2.369g/cm3. Soluble in hot water, soluble in potassium acetate, insoluble in anhydrous ethanol. The aqueous solution is acidic and strongly corrodes glass and ceramics. It decomposes when heated to about 225 °c. Hydrogen fluoride is released by absorption of moisture in moist air. preparation method: potassium hydroxide or potassium carbonate is reacted with a sufficient amount of hydrofluoric acid, or hydrofluoric acid is added to a saturated potassium fluoride solution, and the pH at the end point is controlled to be 2 to 3. Application: fluorine can be obtained from electrolytically melted potassium hydrogen fluoride. Industrial for the production of fluorine and fluoride, engraving glass, also used as masking agent, metallurgical flux, preservatives. This information was edited by chemical book Xiaonan (2015-08-17). solubility in water (g/100ml) grams dissolved per 100ml of water at different temperatures (℃): 44.7g/0 ℃;53.5g/10 ℃;94.9g/20 ℃;108g/30 ℃;138g/40 ℃ 142g/60 ℃;150g/80 ℃ preparation 1) G potassium hydroxide was dissolved in g water to obtain potassium hydroxide solution, hydrogen fluoride gas was introduced into the potassium hydroxide solution, the introduction rate of hydrogen fluoride gas is appropriate to maintain the reaction temperature at 40-70 ℃; 2) when the pH value of the reaction solution reaches 6.8, the introduction of hydrogen fluoride gas is stopped and the neutralization reaction is completed; 3) after settling the reaction solution for 12 hours, take the supernatant; 4) cool the supernatant to 21 °c, add 1g calcium chloride, and the potassium fluoride aqueous solution will complete the crystallization in an instant; 5) after Suction filtration and washing with a saturated aqueous potassium fluoride solution, the filter cake was placed in a vacuum oven and dried for 4 hours to obtain a 99.5% high-purity potassium fluoride product. toxicity This product is toxic, LD50245mg/kg. It is irritating to the skin and eye mucosa. The operator must wear protective equipment. See aluminum fluoride for details Protection Measure. Use used as a masking agent for Complexometric titration and food preservative, and also used for glass engraving used for glass engraving, food anti-corrosion, electroplating, etc., also used as welding flux, pesticides, fluoride, absorbent for glass engraving, food anti-corrosion, electroplating. It can be used as a welding flux, an insecticide, a fluorinating agent of an organic compound, a catalyst, an absorbent (absorbing HF and moisture), and the like. It is also a raw material for the preparation of potassium hydrogen fluoride. used in a variety of glass etching, welding fluxes, wood preservatives, agricultural pesticides and pesticide intermediates, raw materials for the pharmaceutical industry, and organic fluorinated raw materials. complex-forming agents, drop-wise analysis of tantalum, fermentation inhibitors, food preservatives. production method solid potassium hydroxide is dissolved in an equal amount of water in the neutralization tank by neutralization method, and then anhydrous hydrofluoric acid (or 40% hydrofluoric acid) is introduced. When Ph = 7~8, stop using anhydrous hydrofluoric acid and settle at rest for 24h. The resulting clear solution (containing about 40% of potassium fluoride) sent to a vacuum evaporator for vacuum concentration (pressure of 79993), when the solution contains most of the crystals, then filtered (pressure of 0.2~0.3 Mpa), dry under vacuum (pressure 79993) for 6h to obtain a finished potassium fluoride. Its KOH + HF → KF + H2O toxic substance data information provided by: pubchem.ncbi.nlm.nih.gov (external link)

產品百科查看更多

物理化學性質
英文名	calcium difluoride
中文名	氟化鈣
CAS號	7789-75-5	溶解性	INSOLUBLE
分子量	78.07480	熔點	1402 °C
密度	3.18?g/mL?at 25?°C(lit.)	沸點	2500?°C(lit.)

商家信息

瑩科新材料股份有限公司

聯系人：尹柏利

號碼一： 185****

號碼二： 186****

VIP企業默認展示聯系方式，非VIP企業僅限注冊登錄用戶可見

公司類型：生產廠
成立時間：2004-02-16
所在地區：河北省承德市
注冊資本：43400萬元

進入店鋪

推薦供應商

產品：氟化鈣

查看全部供應商

久久人妻熟女中文字幕av蜜芽,我我色综合,两女女百合互慰av赤裸无遮挡,脱了内裤掀起pg两边打肿

手機號綁定

請輸入校驗碼

請選擇用戶類型

綁定企業

氟化鉀

產品詳情

產品百科查看更多

商家信息

瑩科新材料股份有限公司

產品：氟化鈣